All of us enjoy a refreshing, crystal clear swimming pool. However, cleaning and maintaining it can be tough. It will require exerting lots of effort when cleaning it.
Keeping the pool clean is vital because not only does it maintain the cleanliness of the water, but it will also keep our health safe as well as your investment.
The pool’s water can collect many small particles as well the bigger ones like leaves, insects, hair, skin, sticks, detergents, and others. These things are both a threat to our health and your pool’s circulation system. Therefore, it is quite necessary to use a suction tool for your pool.
Read more: water softener[amazon box=”B00ESQMA8M,B00Q8M0NWE,B002G9U17U” grid=”3″]
8 Best Suction Pool Cleaners to Help Maintain Your Pool
To help you out with your decision making, you can check out the listed products below. Find out which product will maintain your swimming pool best.
8. XtremepowerUS Automatic Suction Pool Cleaner
The XtremePowerUS is ideal for cleaning your pool’s walls and flooring. However, it cannot be applied to cleaning the pool’s steps. To function properly, the product will require at least one hp pool pump or 1,600 GHP.
This pump doesn’t require any kind of tool or even electricity. It just needed to be attached to your pool’s filtration system. This pool cleaner can move at a rate of 8 to 12 feet a minute. So expect your pool to be fully cleaned in a few hours or so.
7. Polaris Vac-Sweep Pressure Pool Cleaner
This product is a pressurized pool cleaner that works in all kinds of in-ground pools. However, it will require the use of a booster pump, which is sold separately. This item is powered by a double set of the jet, which will finish much faster. Usually, it can clean your entire in just 3 hours or less.
This product connects to your pool’s dedicated pressure line. Once connected, it will scrub, sweep, and vacuum all the surfaces of your in-ground pool. If you are looking for a pool suction cleaner that can pick up large debris, this product will be your best bet. It can pick up acorns, leaves, pebbles, sticks, and other small and large debris.
6. Zodiac BARRACUDA Suction Side Automatic Pool Cleaner
This is a quiet yet powerful pool suction cleaner that can work with a low-speed pump. This is for maximum efficiency. The downside of this product is that it can only get small and medium-sized particles and debris. It’ll make less likely to suck up large debris like leave and acorns.
Unlike the other products, this item doesn’t need gears, wheels, or other kinds of extra materials. Because of its lack of extra materials, the product lasts much longer than other pool suction products.
5. Hayward Wanda the Whale Suction Pool Cleaner
You don’t have an in-ground pool but have an above-ground pool? Then no worries, you can also find a suction pool cleaner for above ground pools. This product has a unique turbine system that can provide constant balanced water flow, which will assure a quiet operation and a gentle movement across your pool’s flooring.
Another feature of this product is that this device is intended to be permanently fixed in your pool’s filtration system, which means that you cannot uninstall this product or even store it. But even if it is a permanent system, it is quite effective in keeping your pool clean.
4. Hayward Poolvernuegen Automatic Suction Pool Cleaner
Here is another awesome item from Hayward. This is a 4-wheeled suction tool specifically designed for larger sized pools like a lap pool, diving pool, and pools with no dedicated suction line but has a skimmer that can be found at either side of the pool.
This is suitable for all kinds of pools. Another great feature of this product is that it has a self-adjusting turbine vane that can maximize its power, enabling large debris to go through the hose. It also has an adjustable skirt for height and tire treads, which will allow it to climb on the pool’s walls.
3. Intex Auto Pool Cleaner
For this product to function, you need a filter pump with a flow rate of about 1,600 to 3,500 GPH. This product can be attached to the inlet connector in your pool using a 24’7” hose. The downside of this product is that it can only be used on above-ground pools. This item is not suitable for in-ground pools.
For the product’s maximum performance, you should ensure that the suction pool cleaner is always properly set up and that all the air pockets are removed from the pool cleaner’s hose. This product is specifically designed for the Intex Pool owners.
2. Pentair Inground Pool Cleaner
This is an automatic in-ground pool cleaner that is programmed with SmartTrac Steering. The machine easily navigates its way around the pool’s obstacles for smooth cleaning. It automatically adjusts itself to ensure effective cleaning and without interruption.
In addition to this product, it has a vacuum port door fitting with a spring-loaded cover for everyone’s safety. The products can be set up easily, so you don’t have a problem assembling the product. This item can also pick up small and large debris, unlike other suction cleaners that can only pick small particles.
1. Dolphin Nautilus Robotic Pool Cleaner
Unlike other robotic suction pool cleaners, this product is much lighter than most products. It weighs around 22 pounds, and it effectively and efficiently cleans out your whole pool without a problem.
This product’s filter can be easily cleaned and removed due to the bot’s top access filter. It also has a dual cartridge system that can pick up fine and coarse debris simultaneously. There is no need for you to swap out different kinds of filters for different cleaning cycles.
Picking Out the Right Suction Pool Cleaner
Trying to pick out the best suction tool for your tool can be quite confusing. Why? Because there are many optional products that you can choose from, and the products also come into three types.
The types of suction cleaners for a pool that you can choose from are:
- Automatic Pool Cleaner
- Suction Pool Cleaner
- Pressure Pool Cleaner
To know more about these types of tools, let us give you a brief description of it.
Automatic Suction Pool Cleaners
Like all the automated products out there, the automated pool cleaner is also constructed with chips, motors, and sensors to perform a task. To function, these robotic suction cleaners are plugged into an outlet by a low-voltage transformer.
As it moves, the automated cleaner will move around the pool’s flooring and walls, sucking up all the debris on its way. As it sucks up the debris, it also filters out the water. The filtered water will only contain about 2 microns.
These suction cleaners act more like a vacuum cleaner, which collects the debris in its cartridge or filter bag, and then returns the clean filtered water into the pool. As the machine moves along the floor and walls of the pool, it also scrubs it.
Suction Pool Cleaners
This type is a vacuum that is powered by your pool’s filtration system. The hose of this kind of item will be directly connected to your pool filter’s suction side with either a dedicated suction line or a skimmer. The pool pump’s suction powers up the turbine, which will then propel it with a stop or start motion.
The unit’s vacuum part will rely on the pool pump’s suction. It will suck up all the small debris and be collected in the pool’s pump basket. With this kind of suction pool cleaner, your pool pump should at least have a ¾ horsepower or more. If not, the suction cleaner will provide you with poor suction and struggle with a low flow.
Pressure Suction Pool Cleaners
This type of pool cleaner will be connected to the return side of your swimming pool’s circulation system. This product is also called a Booster Pump Powered Cleaner. This is because most of these cleaners are powered by a booster pump, which can be operated with a timer. This means that you can set the machine to operate at regular times of the day. This product also has its filter bag to collect the debris.
To Wrap Up!
I hope that this article has helped you out in any way with how you’ll proceed and buy the perfect cleaner for your pool. Here is a quick summary of the article if you have no time to read:
- For robotic/automated suction pool cleaners, expect your purchase to cost around $300 to $1000 or more. The robot designed products are much more expensive than regular automatic ones.
- For the suction side pool cleaners, you can expect to cost you around $100 to $500. This will depend on the product’s brand.
- The pressure suction pool cleaners can cost you around $400 to $900 or more. Some pressurized suction pool cleaners will require the use of a booster pump, which can add to the current price